I'm currently running High Sierra, 10.13.6. This card is based off the ASMedia ASM1061 SATA IDE controller, which I've heard from members of this forum and elsewhere works quite well with OS X - well, is supposed to. However, under OS X, nothing seems to work. That 25 board contains a ASMedia asm1061 sata 3 chipset The screen looks like.
Asmedia asm1061 driver windows 2012 upgrade#
Windows - Client, version 21H2 and later, Servicing Drivers, Windows - Client, version 21H2 and later, Upgrade & Servicing Drivers, Windows - Client S, version 21H2 and later, Servicing.
Asmedia Technology - SCSIAdapter - 3.2.3.0.
Asmedia asm1061 driver windows 2012 install#
I have been able to install and boot successfully with it, and the connected drives appear in Windows 10 (so I can verify that it's not DOA, which was my first concern). Windows 10, version 1903 and later, Servicing Drivers. 4 x SATA3 6.0 Gb/s connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug. It's the one with 4 SATA ports to expand my desktop's hard drive capacity. For Windows 64-bit OS with 64-bit CPU, there is no such limitation. Today, I had a SU-SA3004 PCIe expansion card arrive. Thanks for checking out my thread and for any help you guys can offer. Funnily enough, I also have a PCI USB expansion card (same vendor, ASM1142 host controller) to add further USB ports to my computer, and it worked from the get-go. Both products claim they support Windows 2012 R2, however after multiple calls and escalating the Technical Support call to a senior support specialist, Startech admitted their board does not support booting Windows Server 2012 R2 from the attached array. I have not made any patches to the DSDT or SSDT or anything like that (I have heard some people make changes to these files to get some things to function properly). If I select DATA it will boot however the card not being detected or functioning persists. if I put the asmedia card back into the PCIE2.0x16 slot it is not working. If I select either AHCI or IDE, MacOS fails to boot (the point it reaches is that the verbose boot will spit out all of its data and appear to have not run into any errors, then the screen will go black as if it's about to show the login screen, then it just hangs there). now tried a few things and finally swapped the Asmedia card with the intel nic card on the nas box (originally i have the asmedia card plugged into the PCIE2.0x16 slot) and plug this asmedia card into a dedicated PCIE2.0x1 slot. The card itself features a switch to toggle between a couple of modes - AHCI, Data and IDE. In my efforts to get this card to work, I have installed a couple of kexts - those being AHCI_3rdParty_SATA.kext as well as AHCIPortInjector.kext, which don't seem to have had any effect either. Windows Server 2003,Windows Server 2008 R2,Windows Server 2012,Windows. Building a CustoMac Hackintosh: Buyer's Guide Chipset: ASMedia - ASM1061, Logical block addressing (LBA) support: 48 bit.
0 kommentar(er)
